Skip to content
Search

[Search]

Suggestions: Schuberth Cersaie immersive stands pop-up store

Front view of the Santen stand at the SISO 2026 congress: immersive hexagon with content on the tear film, Santen reception and meeting area with a high table

Pharmaceutical and MedTech

Stands for medical
and scientific congresses

From floor plan to dismantling

A single point of contact

VØID designs and builds stands for pharmaceutical, MedTech and medical device companies at scientific society congresses. It follows the whole process, from the organising secretariat’s floor plan to dismantling: venue regulations, paperwork, content and build-up.

Congress centres and hotels

It works in Italian congress centres and congress hotels, from its offices in Vicenza, Milan, Rome, Reggio Emilia and Venice.

How does a stand at a medical congress work?

A medical congress takes place in a congress centre or a hotel, around the rooms of the scientific sessions. The exhibition area is small and the stand often measures just a few dozen square metres.

The audience is made up of specialist doctors, pharmacists and healthcare professionals. They reach the stand during coffee breaks and between sessions. In a twenty-minute break the stand has to welcome, inform and see off dozens of people.

Every congress venue has technical regulations with precise constraints. VØID designs the stand starting from these constraints: the venue regulations are the first document it asks the client for.

Constraints set by the venue regulations

  1. Heights

    Low maximum heights: in a congress hotel the limit can be as low as 2.5 metres.

  2. Structures

    Open or semi-open structures, so as not to block the way to the session rooms.

  3. Materials

    Class 1 fire-rated materials, with certificates to be submitted before build-up.

  4. Access

    Regulated vehicle access; at some venues only electric vehicles are allowed inside.

  5. Timing

    Build-up the evening before opening and dismantling within a few hours once the congress ends.

How do you design a stand for a medical congress?

The design starts from the floor plan. VØID assesses the stand’s position in relation to the plenary rooms, the catering area and delegates’ routes, because these decide where the audience comes from.

  1. Flows for the breaks

    The stand has to handle many people in a few minutes. The desk sits on the side of the main aisle, and content is read standing up from two metres away.

  2. One message at a time

    A doctor stops for a data point, a mechanism of action, a study. The stand puts one at the centre; the rest is available on request.

  3. Room for conversation

    A quiet area lets the medical rep, medical science liaison or key account manager talk to the doctor without interruptions.

  4. Light, reusable structures

    A pharmaceutical company attends many congresses in the same season. Modules, graphics and furniture are designed to move from one congress to the next and from 12 to 30 square metres.

  5. Brand and guidelines

    The stand applies corporate and product guidelines. The layout changes with the venue; the identity stays the same.

Which rules apply to a pharmaceutical or MedTech company’s stand?

The rules come at three levels: the law, the industry code and the congress regulations.

VØID does not touch scientific content. It lays out and makes interactive texts already approved by the client’s medical and regulatory office. Every change goes back to the company for new approval before printing or going on screen.

  1. Medicines

    Promotional material on medicines follows the company’s internal procedures and filing with AIFA, the Italian Medicines Agency. This also applies to digital content shown on the stand’s screens.

  2. Farmindustria code of conduct

    It governs hospitality and materials handed out at the congress. Gadgets must be of negligible value, relevant to medical practice and must not visually recall medicine packaging.

  3. Medical devices

    MedTech companies follow the code of ethics of MedTech Europe and Confindustria Dispositivi Medici.

  4. Congress regulations

    Each scientific society and organising secretariat sets deadlines, documents to submit and rules for the exhibition area.

What can technology do on a scientific stand?

A medical congress talks about invisible mechanisms: a molecule, a receptor, a cellular process, an implanted device. Technology serves to show them.

These modules can also be added to a stand the company already owns, with the VØID Exhibition Intelligence service. For an experience built around the visitor, see our immersive stands.

  1. Anatomy and mechanism of action in 3D

    The doctor rotates an organ or follows the path of an active ingredient on a screen or LED wall.

  2. Augmented reality

    A diagnostic machine too large for the stand is shown at real scale on a tablet.

  3. Interactive table

    Placing an object on the table opens the data of a study or a product’s indications.

  4. Touchless interaction

    Visitors scroll through content with a hand gesture. In a healthcare setting it avoids shared surfaces.

  5. Material and contact requests

    With a QR code the doctor requests a rep visit, a study or a sample, with privacy consent recorded.

Which congress centres does VØID work in?

VØID builds stands in the main Italian congress centres and in hotels with congress facilities, including:

  • Allianz MiCo, Milan
  • Roma Convention Center La Nuvola, Rome
  • Rome Cavalieri, Rome
  • Palacongressi di Rimini
  • Palazzo dei Congressi, Florence

For European scientific society congresses, VØID also handles design and build-up abroad. See also our stands in Milan and Rome.

Medical projects

Santen Italia at the 5th SISO National Congress, Rome Cavalieri, Rome, 2026: a 20 m² stand with a hexagonal infinity mirror installation and an inner screen.

Your next congress

Send us the floor plan and the venue regulations: we’ll start from there.

Request a design
Contact us